Quality Leadership Forum

The Quality Leadership Forum (QLF) is an aerospace forum that meets annually for the advancement of Quality Assurance practices, for discussing Quality issues and for sharing Quality information. The principal objectives of the QLF are to

  • Integrate Quality approaches
  • Standardize Quality practices
  • Improve use of Quality resources
  • Define and analyze Quality risks,
  • Communicate lessons learned
  • Share best practices
  • Improve Quality processes.

Presentations

Year Title Description Category Specific Date Presentation
2014
CY14 Joint Audit Schedule
Audit Schedule for 2014 Suppliers
Joint Audit Planning Committee
2/20/2014
See Schedule
2014
ESD Audit Checklist
Presented by Gene S. Monroe, Jr.
Joint Audit Planning Committee
2/20/2014
See Presentation
2014
Registrar Report Card Process
Presented by R. Darrell Taylor, Raytheon, Database Chair for the AAQG/RMC
Joint Audit Planning Committee
2/19/2014
See Presentation
2014
NASA Supplier Assessment System (SAS)
Presented by Kris Dietrich, NASA JSC/SAIC and Adrianne Bickham, NASA JSC/SAIC
Joint Audit Planning Committee
2/19/2014
See Presentation
2014
DCMA’s NASA Audit & Training Team (NATT)
Presented by Mr. Craig Bennet, Process Management Division, HQ DCMA/QAA
Joint Audit Planning Committee
2/19/2014
See Presentation
2014
Material Control: The Right Stuff
Presented by Brian Hughitt, Office of Safety and Mission Assurance
Joint Audit Planning Committee
2/19/2014
See Presentation
2014
NASA Joint Audit Planning Committee Face to Face
Meeting at Ames Research Center
Joint Audit Planning Committee
2/19/2014
See Presentation
2014
Ames Research Center Overview
An Overview Presentation of Ames Research Center by Mike Liu, Director of Safety and Mission Assurance, ARC
Joint Audit Planning Committee
2/19/2014
See Presentation
2017 EEE Parts Bulletin June - July 2017
Special Edition on Crystal Oscillators
Electrical, Electronic and Electromechanical Parts
10/2/2017
See Bulletin
2017 EEE Parts Bulletin August 2017 - May 2018
Third Special Edition on Electrostatic Discharge (ESD)
Electrical, Electronic and Electromechanical Parts
7/1/2018
See Bulletin
2016
EEE Parts Bulletin January - July 2016
Special Edition on Electrostatic Discharge (ESD)
Electrical, Electronic and Electromechanical Parts
3/1/2017
 See Bulletin
2017
EEE Parts Bulletin August 2016 - May 2017
Second Special Edition on Electrostatic Discharge (ESD)
Electrical, Electronic and Electromechanical Parts
6/16/2017
See Bulletin
2015
EEE Parts Bulletin August - December 2015
Status of Thin Dielectric Multilayer Ceramic Capacitors and Additional Slash Sheets for Inter-digitated Capacitors (IDCs)
Electrical, Electronic and Electromechanical Parts
8/1/2015
See Bulletin
2016
EEE Parts Bulletin January - July 2016 Special Edition on Electrostatic Discharge (ESD)
Electrical, Electronic and Electromechanical Parts
1/1/2016
See Bulletin
2014 EEE Parts Bulletin August - November 2014
EEE Parts Selection for Class D Missions: NASA Ames Research Center Philosophy
Electrical, Electronic and Electromechanical Parts
8/1/2014
See Bulletin
2018 EEE Parts Bulletin June - September 2018
Compendium Special Edition on Electrostatic Discharge (ESD)
Electrical, Electronic and Electromechanical Parts
6/1/2018
See Bulletin
2012
EEE Parts Bulletin March - April 2012
Class Y Special Issue
Electrical, Electronic and Electromechanical Parts
3/1/2022
See Bulletin
2013
EEE Parts Bulletin August - December 2013 Class Y, a new Class of Space Microcircuits
Electrical, Electronic and Electromechanical Parts
8/1/2013
See Bulletin
2013
EEE Parts Bulletin March 2013
A Look at Failure: GaNFET Rupture
Electrical, Electronic and Electromechanical Parts
3/1/2013
See Bulletin
2012
EEE Parts Bulletin November - December 2012
A Look at Failure: Weld Splatter
Electrical, Electronic and Electromechanical Parts 11/1/2012
See Bulletin
2012
EEE Parts Bulletin May - June 2012
Gallium Nitride – Worth the Hype?
Electrical, Electronic and Electromechanical Parts
5/1/2012
See Bulletin
2013
EEE Parts Bulletin April - May 2013
Special Issue: Reliability of Multilayer Ceramic Capacitors with Base-Metal Electrodes
Electrical, Electronic and Electromechanical Parts
4/1/2013
See Bulletin
2011
EEE Parts Bulletin May - June 2011
Dangerous Counterfeit Electronics, Vishay Cage Codes, Class K Alternate Element Evaluation Die Sampling
Electrical, Electronic and Electromechanical Parts
5/1/2011
See Bulletin
2013
EEE Parts Bulletin June - July 2013
Special Issue: CGA Assemblies under Thermal Cycling Electrical, Electronic and Electromechanical Parts
6/1/2013
See Bulletin
2014
EEE Parts Bulletin June - August 2014
Capturing a Failure of an ASIC in-situ Using Infrared Radiometry and Image Processing Software, Potential Threat to Printed Wiring Boards
Electrical, Electronic and Electromechanical Parts
6/1/2014
See Bulletin
2015
EEE Parts Bulletin June – July 2015
Special Issue: Flip-Chip Underfills
Electrical, Electronic and Electromechanical Parts
6/1/2015
See Bulletin
2014
Material Control - The Right Stuff
NASA Joint Audit Planning Committee Presentation
Electrical, Electronic and Electromechanical Parts
2/1/2014
See Presentation
2014
EEE Parts Bulletin January - May 2014
PIDTPs for Qualifying New Packaging Technologies, OSMA Introduces Class Y Microcircuits, NASA Effort to Baseline Electronic Counterfeit Parts Detection Capability
Electrical, Electronic and Electromechanical Parts
1/1/2014
See Bulletin
2013 Counterfeit Parts Avoidance
SMA Discussion Forum Series
Counterfeit Parts
9/29/2014
See Presentation
2013
Counterfeiting in the News
A List of Links Regarding Counterfeiting Provided by Dan Pasquale, U.S. NRC, Office of New Reactors
Counterfeit Parts
7/6/2013
See List
2013
Counterfeits In Military And Aerospace Applications
A Q&A session with Mark Bollinger, VP of Smith and Associates
Counterfeit Parts 3/20/2013
See Document
2013
Counterfeit Integrated Circuits: Detection, Avoidance, and the Challenges Ahead
Created by Ujjwal Guin, Daniel DiMase, and Mohammad Tehranipoor
Counterfeit Parts
8/6/2013
See Document
2013
NASA Counterfeit Parts Awareness and Inspection Training
Created by Mark LeBlanc
Counterfeit Parts
8/6/2013
See Flyer
2013
Five Truths to Reduce Complexity and the Implementation Cost of Your Quality Management System (QMS) Design
Presented by Dennis R. Owens
Manager, R&D Engineering and Science
Defense Systems Quality Engineering
Sandia National Laboratories, New Mexico
Counterfeit Parts
3/1/2013
See Presentation
2013
Compliance Programs for Counterfeit Parts Avoidance and Detection
Presented by Henry Livingston, BAE Systems Electronic Systems
Counterfeit Parts
3/4/2013
See Document
2016
Jet Propulsion Laboratory Campus Directory
A Map of the Jet Propulsion Laboratory Campus
Additive Manufacturing
10/11/2016
See Map
2016
Quality Assurance in Additive Manufacturing Agenda
Workshop Agenda
Additive Manufacturing
10/11/2016
See Agenda
2016
Powder Quality Discussion Points
Presented by NNWG
Additive Manufacturing
10/11/2016
See Presentation
2016
Breakout Session AM Supplier Audit/Qualification
Presented by CalRAM, A Division of Midstate Berkshire
Additive Manufacturing
10/11/2016
See Presentation
2016
NDE Discussion Points
Presented by NNWG
Additive Manufacturing
10/11/2016
See Presentation
2016
NASA Quality Assurance in Additive Manufacturing (AM)
A Workshop on Assuring AM Product Integrity
Additive Manufacturing
10/11/2016
See Presentation
2016
Breakout Session - Industry and Academic Partnerships
Presented by R. Peter Dillon, JPL
Additive Manufacturing
10/11/2016
See Presentation
2016
Process Monitoring and Control for Metal Additive Manufacturing
Presented by Suman Das and Morris M. Bryan, Georgia Institute of Technology
Additive Manufacturing
10/11/2016
See Presentation
2016
EOS Technologies Overview
Presented by Ankit Saharan, Senior Applications Developer, EOS of North America, Inc.
Additive Manufacturing
10/11/2016
See Presentation
2016 Additive Manufacturing Qualification Methodology for Spaceflight
Presented by Bryan W. McEnerney, R. Peter Dillon, J.P.
Borgonia, and Andrew A. Shapiro-Scharlotta
Additive Manufacturing
10/11/2016
See Presentation
2016 QM Meltpool 3D
High Resolution Real-Time Process Monitoring in 3D
Additive Manufacturing
10/11/2016 See Presentation
2016 Framework to Qualify Additive Manufacturing of Metals
Presented by Michael O'Brien from The Aerospace Corporation
Additive Manufacturing  10/12/2016
See Presentation
2016
NASA OSMA NDE Program Additive Manufacturing Foundational Effort
NASA Quality Assurance in Additive Manufacturing Workshop on Assuring AM Product 
Additive Manufacturing
10/11/2016
See Presentation
2016 Additive Manufacturing Certification Presented by Rick Russell, NASA Technical Fellow, NASA Engineering and Safety Center
Additive Manufacturing
10/11/2016
See Presentation
2016 Key Quality Assurance Metrics in Additive Manufacturing
Presented by Doug Wells, Marshall Space Flight Center
Additive Manufacturing
10/11/2016
See Presentation
2016 NASA Workshop Quality Assurance in Additive Manufacturing - Into the Great Unknown Presented by Brian Hughitt, NASA Headquarters  Additive Manufacturing 10/11/2016 See Presentation
2016 NASA Quality Assurance in Additive Manufacturing - A Workshop to Assure AM Product Integrity Additive Manufacturing Agenda Additive Manufacturing 10/11/2016 See Agenda
2019 Overview of Developments in Voluntary Consensus Standards for Counterfeit Parts Avoidance Webinar presented by Bhanu Sood, Goddard Space Flight Center Counterfeit Parts 5/9/2019 See Presentation
2019 NASA Counterfeit Parts Awareness and Inspection - Basic Presentation by Jerry Martinez and Allison Guerrero at the Quality Leadership Forum Counterfeit Parts 3/15/2019 See Presentation
2019 NASA Counterfeit Parts Awareness and Inspection - Intermediate Presentation by Jerry Martinez and Allison Guerrero at the Quality Leadership Forum Counterfeit Parts 3/15/2019 See Presentation
2020 EEE Parts Bulletin October 20, 2020  Non-hermetic and plastic-encapsulated microcircuits, Part 2 Electrical, Electronic and Electromechanical Parts 10/20/2020 See Bulletin
2020 EEE Parts Bulletin October 2019-March 2020
EEE Parts Bulletin  Electrical, Electronic and Electromechanical Parts
6/11/2020 See Bulletin
2019 EEE Parts Bulletin Special Edition on ESD
The NASA EEE Parts Bulletin – Compendium Special Edition on Electrostatic Discharge
Electrical, Electronic and Electromechanical Parts
5/14/2019 See Bulletin
2018 NASA EEE Parts Bulletin August 2017-May 2018
Issue of the NASA EEE Parts Bulletin; this is the third special edition on Electrostatic Discharge
Electrical, Electronic and Electromechanical Parts
7/31/2018 See Bulletin
2021 Frontline Supply Chain Risk Management Webinar Rapid innovation for supplier surveillance during the COVID-19 pandemic presented by Sandi Bowersox, Valle Kauniste and Jonathan Root Misc. Information 1/14/2021 See Presentation
2020 Maximizing Audit ROI: Effective Corrective Action
Assessments and Investigations Office Webinar presented by Amber Rowson, Show Me Quality Consulting
Misc. Information 7/29/2020 See Presentation
2019 Oversight of Strategic Changes to NPR 8735.2 for NASQ Quality Assurance
Webinar presentation presented by Jeannette Plante
Misc. Information
6/19/2019 See Presentation
2021 From Cosmic Quality to Micro-Quality The Transformation of Quality from atoms to digits, presented by Gregory H. Watson, PhD., EUR ING Quality Leadership Forum 6/24/2021 See Presentation
2021 IAQ State on Quality 4.0
Defining challenges for its incorporation and deployment, provided by Dr. Gregory H. Watson, Quality 4.0 Think Tank chairman
Quality Leadership Forum
6/24/2021 See Presentation
2021  NASA Trainers Continuing Education and Information - Sharing Retreat
Quality Leadership Forum, presentation by Alvin Boutte, NASA Office of Safety and Mission Assurance
Quality Leadership Forum
6/24/2021 See Presentation
2021 Digital Twin for Quality and Mechanical Systems Assurance
Quality Leadership Forum presentation by Alejandra Constante, NASA Goddard Space Flight Center
Quality Leadership Forum
6/24/2021
See Presentation
2021 Quality Leadership Forum June 24, 2021 Recording
General Session of the June 24, 2021 Quality Leadership Forum
Quality Leadership Forum
6/24/2021
See Presentation
2021 Supply Chain Security and Mission Assurance
Legislation drivers, NASA policies and best practices, presented by  Jonny Pellish, NASA Headquarters
Quality Leadership Forum
6/24/2021
See Presentation
2021 Additive Manufacturing Design, Process and Quality Controls
Presentations on Additive Manufacturing
Quality Leadership Forum
5/27/2021
See Presentation
2021 The Future of Inspections Using Mixed Reality for Remote Verifications
Session 2: Digital Transformation, presented by Julee Powers, NASA Marshall Space Flight Center
Quality Leadership Forum
4/22/2021
See Presentation
2021 How to Store Your Data to Enable Modern Data
Session 2: Digital Transformation, Analytics: NASA's Hardware Inspection Data, presented by Elizabeth Wainwright and Justin Gosses, NASA Johnson Space Center
Quality Leadership Forum
4/22/2021
See Presentation
2021 The Need for Digital Twins for Manufacturing and Supplier Assurance
Session 2: Digital Transformation, presented by Jon de Nijs, Lockheed Martin
Quality Leadership Forum
4/22/2021
See Presentation
2021 Safety and Mission Assurance Management for 7120.8
Presentation by Ali Guarneros Luna, NASA Ames Research Center
Quality Leadership Forum
3/11/2021
See Presentation
2021 JPL's Approach to Quality Assurance Tailoring for SmallSats and CubeSats
Presented by John O'Donnell, Jet Propulsion Laboratory
Quality Leadership Forum
3/11/2021
See Presentation
2021 Mission Portfolio Risk Management
Presented by Greg Stover, NASA Langley Research Center
Quality Leadership Forum
3/11/2021
See Presentation
2020 NASA FAR Supplement (NFS) for Counterfeit Electronic Part Detection and Avoidance
Presented as a webinar by Anthony Rodgers, NASA office of Safety and Mission Assurance
Quality Leadership Forum
9/24/2020
See Presentation
2020 Integrating Risk Management and Nonconformance & Deviation Management
Presented as a webinar by Jonathan Demboski, NASA Ames Research Center.
Quality Leadership Forum
8/27/2020
See Presentation
2019 Human Factors and Risk Management
Presented by Glenn Graham, NASA Armstrong Flight Research Center
Quality Leadership Forum
3/14/2019
See Presentation
2019 Achieving Excellence in System Integration & Data Science World Management
Presented by Diala Gammoh, Universal Orlando
Quality Leadership Forum
3/14/2029
See Presentation
2019 The Future of Quality in a Model Based Systems Engineering (MBSE) World
Presented by Sean Beckman, NASA Glenn Research Center
Quality Leadership Forum
3/14/2019
See Presentation
2019 SLS Integrated Quality and Communication
Presented as a webinar by Jonathan Demboski, NASA Ames Research Center.
Quality Leadership Forum
8/27/2020
See Presentation
2019 Integrating Risk Management and Nonconformance & Deviation Management
Presented by Leigh Key, NASA Marshall Space Flight Center
Quality Leadership Forum
3/14/2019
See Presentation
2019 Mentoring Early Career Hires in Quality
Presented by Jason Fowler, SAFT
Quality Leadership Forum
3/14/2019
See Presentation
2019 Live Polling 3/14/19 8:15 a.m.
Results from live polling Quality Leadership Forum
3/14/2019 See Results
2019 Applying Systems Engineering to CubeSat Missions
Presented by William Mast, NASA Wallops Flight Center
Quality Leadership Forum
3/14/2019
See Presentation
2019 Smart Manufacturing and Space Systems
Presented by Jeff Juranek, The Aerospace Corp.
Quality Leadership Forum
3/14/2019
See Presentation
2019 2019 QLF Attendee List
List of attendees
Quality Leadership Forum
3/14/2019
See List
2019 A Year in OSMA Quality Policy
Presented by Jeannette Plante, NASA Headquarters
Quality Leadership Forum
3/13/2019
See Presentation
2019 Commercial Crew - The Catalyst for a New Space Age
Presented by Kathy Lueders, NASA Kennedy Space Center
Quality Leadership Forum
3/13/2019
See Presentation
2019 Premature Wear of the "Curiosity" Mars Rover Wheels
Presented by David Oberhettinger, Jet Propulsion Laboratory
Quality Leadership Forum
3/13/2019
See Presentation
2019 Lessons from BETTII Close Call
Lessons from Balloon Experimental Twin Telescope for Infrared Interferometry close call, presented by Michael Viens, NASA Goddard Space Flight Center
Quality Leadership Forum
3/13/2019
See Presentation
2019 March 13, 12:30 p.m. Live Polling Results
Results from live polling
Quality Leadership Forum
3/13/2019
See Results
2019 Workmanship Lab Management at GSFC
Presented by Bo Yang, NASA Goddard Space Flight Center
Quality Leadership Forum
3/13/2019
See Presentation
2019 Overview of Developments in Voluntary Consensus Standards
For counterfeit parts avoidance, presented by Bhanu Sood, NASA Goddard Space Flight Center
Quality Leadership Forum
3/13/2019
See Presentation
2019 Live Polling 3/13/19 3:45 - 4:00 p.m.
Results from live polling
Quality Leadership Forum
3/13/2019
See Results
2019 Overview of Strategic Changes to NPD 8730.5 and NPR 8735.2
NASA Quality Assurance policies, presented by Jeannette Plante
Quality Leadership Forum
3/13/2019
See Presentation
2019 Quality Leadership Forum Agenda 2019
Agenda
Quality Leadership Forum
3/13/2019
See Agenda
2019 ESD Control in the NASA STD-8739.6
Presented by Alvin Boutte, NASA 
Quality Leadership Forum
3/13/2019
See Presentation
2019 Sound Bite - Quality and Space Activity in Argentina
Hugo Nahuys, Argentina
Quality Leadership Forum
3/13/2019
See Presentation
2019 2019 Quality Leadership Forum Topics
Topics for 2019 Quality Leadership Forum Quality Leadership Forum
12/19/2018
See Topics

Subscribe

To receive Quality Leadership Forum-related emails, sign up for the mailing list.

Thank you for filling out our form. Loading animation

Organization